| |
Please use
your browser's Back button to return to your previous page when you are finished
with this page. |
| What's a QuiltLadder™? |
A QuiltLadder™
is basically a quilt display rack. |
 |
This model of QuiltLadder™ is designed
to lean against some kind of support; usually a wall. A QuiltLadder™
can be built to just about any size. The large one in this photo is almost
7 feet tall and about 40 inches wide. While the model to the left is portable
since it is not fastened to the wall, QuiltLadders can easily be attached
to structure (e.g. walls) for semi-permanent installation. Models are
also available that are free-standing as well as ceiling-mounted. QuiltLadders
can be built to just about any size. |
| Are the rungs
adjustable? |
Yes |
 |
The vertical spacing of all "rungs" on the QuiltLadder™
to the left are easily adjustable. Unlike real ladders, the "rungs"
on the QuiltLadder are not structural elements. That is, the QuiltLadder
does not gain any needed structural strength from the rungs. That means
you can use as many/few rungs as you want. The number of rungs desired
is specified when we take your QuiltLadder order. |
| What are QuiltLadders
made from? |
Depends on
what you want. |
 |
The model to the left is made from a high-quality, clear maple.
We can easily obtain Walnut, Maple, Cherry, Pine, and a variety of other
domestic and imported hardwoods. (In general, we recommend domestic woods.)
In terms of softwoods, we can construct your rack out of pine if you wish.
Pine looks nice with the occasional knot, but it's not a particularly
strong wood. Also, if you wish, rungs and sideboards can be different
wood species/colors. We will not use Pine for rungs due to its strength
level and the risk of "sap seep" onto a quilt. Pine sideboards
with maple rungs is an attractive combination. |
| Are QuiltLadders
available in both assembled and unassembled form? |
Yes.
|
| |
Probably the most cost-efficient way of purchasing a QuiltLadder
is to order a semi-finished, unassembled model that can be easily put together
in about 30 minutes with only a dozen or so wood screws (provided). All
QuiltLadders are available in unassembled form. The large QuiltLadder pictured
on this page was assembled with 12 wood screws in about 15 minutes. If you
prefer a completely assembled QuiltLadder then shipping can be an issue
if you live a considerable distance from our location (Boise, Idaho). Please
see our shipping information for more details. Click HERE
to see shipping details. |
| What type
of wood finishes are available? |
QuiltLadders
are available with or without wood finish. |
| |
If you'd prefer to receive your QuiltLadder unfinished, that is no problem.
Otherwise, we can apply a finish for you. Some woods, such as maple take
a nice sanding that leaves a natural and durable finish with a smooth, fabric-friendly
touch. Other woods such as oak have n pronounced and open grain that can
benefit from an applied finish. Of prime consideration is the effect the
natural wood surface will have on quilt fabric. Because of this, we suggest
that open-pored woods such as oak or ash be finished with a durable polyurethane
that will minimize friction between wood and fabric. For the ultimate in
smooth surfaces, open-pored woods can also be filled prior to urethane application.
Basically, there are many options with regard to finish. We suggest you
consider your own tastes and choose accordingly. Then, when you order your
QuiltLadder you can communicate your finish preferences. Click HERE
to read a more thorough discussion of finishes/concerns for our quilt racks. |
| |
©2003 Garden Mountain Threadworks L.L.C. |